4 Point Mooring Winch
General description
4 point mooring winch is mainly used to the barge mooring system, apply 4
corner point to secure the barge on water, The working load from 100kn
to 1000kn etc, also the spooling device,centra control station and CCTV
are available for the additional requirements, high quality, powerful
working load with good flow rate hydraulic station powered by diesel
engine.
It can use to the barge which have no power supply, easy to installation and can be moveable in any place.
It can use to the barge which have no power supply, easy to installation and can be moveable in any place.
The working technical requirements;
Environment temperature: 45℃
Sea water temperature: 32℃ Ambient pressure: 0.1MPa
Relative humidity: 70%
Classification and rules： CCS and relevant standards Certificate: CCS certificate，factory certificate。
Unit: ISO
Sea water temperature: 32℃ Ambient pressure: 0.1MPa
Relative humidity: 70%
Classification and rules： CCS and relevant standards Certificate: CCS certificate，factory certificate。
Unit: ISO
Material:
Main components material of 200kN hyd. mooring winch（comply with CCS rules）：
Skid and frame： Q235-A
Warping end： Steel casting
Bush： Brass
Drum： Q235-A
Gear： Big gear ZG270-500
Pinion 40Cr
Shaft： 40Cr
Brake band： Non-asbestos
https://www.jinbomarine.com/4-point-mooring-winch.html?ref=related
没有评论:
发表评论